Element

sizeCode

 

Occurrence:

0

..

1

 

Scheme-Status:

O

 

Type:

shared_common:SizeCodeType

 

   

   

Definition:

Code specifying the size of an object and the size coding system being applied, for example L (buyer assigned).

   

Applicable Codes:

Code

Code Name

Code Description

ADJUSTMENT_HEIGHT

Adjustment Height

The maximum height of the adjustment or compensation, e.g. levelling-, casting- and bonding-compound.

AIR_DRAFT

Air Draft

The term used to describe the distance from the top of a vessel's highest point to its waterline.

AIR_INLET

Air Inlet

The size of the air intake for things like a Valve or Actuator, etc.

AMERICAN_FOOTBALL

American Football

The size of ball and gear used in American football. Examples  Junior; Youth; Pee Wee

ARBOR_DIAMETER

Arbor Diameter

The arbor is the shaft that a blade is mounted to. The size of the arbor is the diameter of this shaft.

AREA_COVERED_MAX

Area Covered Maximum

Indicates the maximum area coverage, e.g. sprinkler, lawn sprinkler.

AREA_COVERED_MIN

Area Covered Minimum

Indicates the minimum area coverage, e.g. sprinkler, lawn sprinkler.

AXLE_WIDTH

Axle Width

Measurement of between the wheels on the front axle.

BACK

Back

NOT AVAILABLE

BACKSET_SIZE

Backset Size

The horizontal distance between the face through which the bolt passes and the centre-line of the knob stem or keyhole.

BACK_RISE

Back Rise

Measurement from the top of the waistband to the crotch at the back of the pants.

BAG_HEIGHT

Bag Height

Measurement of how tall the bag stands from the bottom surface to the top of the bag not including straps/handles.

BAG_STRAP_DROP

Bag Strap Drop

Measurement of a bag's shoulder/handle length from the top of the bag to the peak of the strap/ handle

BAG_STRAP_LENGTH

Bag Strap Length

Measurement of a bag's shoulder/handle length from end to end

BASEBALL_BAT_DROP

Baseball Bat Drop

A length to weight ratio, representing how many ounces a bat weighs compared to its length.

BASE_MEASUREMENT_DEPTH

Base Measurement Depth

Indicates the depth of the base measurement for example of a wood storage shed.

BASE_MEASUREMENT_DIAMETER

Base Measurement Diameter

Diameter of the product base in contact with the floor, table or other plane surface.

BASE_MEASUREMENT_WIDTH

Base Measurement Width

Indicates the width of the base measurement, e.g. of a wood storage shed.

BASKETBALL

Basketball

Basketball is a sport that is played by two teams of five players on a rectangular court. This refers to the ball used in play.  Examples: 5 (Youth); 7 (Men's)

BELT_LENGTH

Belt Length

Measurement of length of the belt from where the belt band begins to the first band hole.

BELT_WIDTH

Belt Width

Measurement of width of the belt. Measured from the top of the waist to the bottom of the waist as worn.

BENCH_PLAIN_BLADE_LENGTH

Bench Plain Blade Length

The length of the bench plane blade e.g. hand plane. A hand plane is a tool for shaping wood. When powered by electricity, the tool may be called a planer. Planes are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber. Planing is used to produce horizontal, vertical, or inclined flat surfaces on workpieces usually too large for shaping. Special types of planes are designed to cut joints or decorative mouldings.

BICYCLE_FRAME

Bicycle Frame

Identify the top of the seat tube, where the seat clamp holds the seat post. Identify the centre of the bottom bracket (it's the axle that holds the crank arms together). Measure the distance between the two points- this is the length of the seat tube.

BLADE_LENGTH

Blade Length

The length of the product blade for example of a hedge shears or knife.

BLADE_WIDTH

Blade Width

The width of a blade for example a bench plain blade.

BOAT_BEAM

Boat Beam

The beam of a ship is its width at the widest point as measured at the ship's nominal waterline.

BOOT_CIRCUMFERENCE

Boot Circumference

Measurement of the inside of the boot at the largest part of the upper calf.

BOOT_SHAFT

Boot Shaft

Measurement from the middle of the arch up the outsole to the top of the boot shaft

BOREHOLE_DIAMETER

Borehole Diameter

The maximum borehole diameter of for a example an impact drill.

BORE_DIAMETER_MAX

Bore Diameter Maximum

Indicates the maximum bore diameter, of for example an impact drill.

BORE_DIAMETER_STEEL_MAX

Bore Diameter Steel Maximum

Indicates the maximum bore diameter for steel of for example an impact drill.

BORE_DIAMETER_STONE_MAX

Bore Diameter Stone Maximum

Indicates the maximum bore diameter for stone of for example an impact drill.

BORE_DIAMETER_WOOD_MAX

Bore Diameter Wood Maximum

Indicates the maximum bore diameter for wood of for example an impact drill.

BORE_STROKE_RATIO

Bore Stroke Ratio

In a reciprocating piston engine, the stroke ratio, defined by either bore/stroke ratio or stroke/bore ratio, is a term to describe the ratio between cylinder bore diameter and piston stroke. 83.0 mm x 69.2 mm

BRA_BAND

Bra Band

Measure around the bottom of the band, directly under the bust.

BRA_CUP

Bra Cup

The difference between the measurement around the chest plus five inches for imperial measures, then Measure around the breast at the fullest part and round to the nearest whole number. a one inch (imperial) difference is an A cup, 2 is a B cup, 3 inch is a C cup, etc.

BRIM

Brim

Measurement of a hat's brim from the edge to where the brim meets the sideband.

CHAIN_LENGTH

Chain Length

Measurement of a chain's longest measurement as laid stretched out flat

CHEST_BUST

Chest Bust

The measurement around the widest part of the chest/bust.

CHUCK_SIZE

Chuck Size

The measurement refers to the size of the drill chuck — the part that holds the bit — and indicates the maximum-diameter bit shank that fits the drill.

CIRCUMFERENCE

Circumference

Measurement of the circumference of the piece.

CLEANING_PATH_WIDTH_WITHOUT_ATTACHMENTS

Cleaning Path Width Without Attachments

The working or cleaning path width of the product without attachments or accessories, e.g. rake.

CLEANING_PATH_WIDTH_WITHOUT_ATTACHMENTS_MAX

Cleaning Path Width Withough Attachments Max

The maximal working or cleaning path width of the product without attachments or accessories, e.g. rake.

CLEANING_PATH_WIDTH_WITHOUT_ATTACHMENTS_MIN

Cleaning Path Width Without Attachments Minimum

The minimal working or cleaning path width of the product without attachments or accessories, e.g. rake.

CLEANING_PATH_WIDTH_WITH_ATTACHMENTS

Cleaning Path Width With Attachments

The working or cleaning path width of the product with accessories, e.g. road sweeper incl. side brushes info: attachment.

CLEARING_WIDTH

Clearing Width

Indicates the width of space that can be cleared by for example a snowplough.

CLIP_BACK_WIDTH_TOOLS

Clip Back Width Tools

Indicates the width of a clip back  for tools for example a brad nailer. A clip back secures a tool to a person's waist.

COLLAR

Collar

Collar

COLLET_SIZE

Collet Size

Collet Size is a subtype of chuck that forms a collar around an object to be held and exerts a strong clamping force on the object when it is tightened, usually by means of a tapered outer collar. It may be used to hold a work piece or a tool.

COMPATIBLE_CONDUIT

Compatible Conduit

An electrical conduit is a tube used to protect and route electrical wiring in a building or non-building structure. Electrical conduit may be made of metal, plastic, fibre, or fired clay.

COOKING_AREA

Cooking Area

The area that can be used for cooking stove top, grill, etc.

COOKWARE_DEPTH

Cookware Depth

Measurement of depth of the cookware as measured from the rim to the bottom.

COOKWARE_DIAMETER

Cookware Diameter

Measurement of diameter of the cookware from rim to rim.

COOKWARE_FIRST_HANDLE_LENGTH

Cookware First Handle Length

Measurement of length of the handle from its attachment point to the end of the handle..

CORE_HEIGHT

Core Height

Indicates the height of the foam core of a product for example a mattress.

CUP

Cup

Cup

CUTTING_DEPTH_MAX

Cutting Depth Maximum

Indicates the maximum cutting depth of a product such as a slide compound miter saw.

CUTTING_DEPTH_METAL_MAX

Cutting Depth Metal Maximum

Indicates the maximum cutting depth of metal of a product such as a slide compound miter saw.

CUTTING_DEPTH_STEEL_MAX

Cutting Depth Steel Maximum

Indicates the maximum cutting depth of steel of a product such as a slide compound miter saw.

CUTTING_DEPTH_WOOD_MAX

Cutting Depth Metal Maximum

Indicates the maximum cutting depth of wood of a product such as a slide compound miter saw.

CUTTING_DIAMETER_OR_CUTTING_WIDTH

Cutting Diameter or Cutting Width

Indicates the cutting diameter or the cutting width, e.g. bypass lopper, hedge trimmer, saw blade.

CUTTING_DIAMETER_OR_CUTTING_WIDTH_MAX

Cutting Diameter or Cutting Width Maximum

Indicates the maximum cutting diameter or the cutting width, e.g. bypass lopper, hedge trimmer, saw blade.

CUTTING_HEIGHT

Cutting Height

Indicates the cutting height of a product such as a lawn mover.

CUTTING_HEIGHT_45_DEGREE_MAX

Cutting Height 45 Degree Maximum

Indicates the maximum cutting height at 45 degrees.

CUTTING_HEIGHT_90_DEGREE_MAX

Cutting Height 90 Degree Maximum

Indicates the maximum cutting height at 90 degrees.

CUTTING_HEIGHT_MAX

Cutting Height Maximum

Indicates the maximum cutting height of a product such as a lawn mover.

CUTTING_HEIGHT_MIN

Cutting Height Minimum

Indicates the minimum cutting height of a product such as a lawn mover.

CUTTING_THICKNESS_MAX

Cutting Thickness Maximum

Indicates the maximum cutting thickness of a product such as a slide compound miter saw.

CUTTING_WHEEL_DIAMETER

Cutting Wheel Diameter

The diameter of the tile cutting wheel.

CUTTING_WIDTH

Cutting Width

The width of the cut of a product such as lawn mowers.

CUTTING_WIDTH_MAX

Cutting Width Max

The maximum width of the cut of a product such as lawn mowers.

CYLINDER_LENGTH_INTERNAL

Cylinder Length Internal

The internal length of the cylinder, e.g. security lock.

CYLINDER_LENGTH_OUTSIDE

Cylinder Length Outside

The outer length of the cylinder, e.g. security lock.

DEPTH_MAX

Depth Maximum

Indicates the maximum depth.

DIAMETER_MAX

Diameter Max

Indicates the maximum diameter.

DIAMETER_MIN

Diameter Min

Indicates the minimal diameter.

DIAMETER_UP_TO

Diameter Up To

Indicates a variety of diameters up to the maximum diameter.

DIRT_PARTICLES_SIZE_MAX

Dirt Particles Size Max

Indicate the maximum size of dirt particles that can be picked up.

DISC_SIZE

Disc Size

The size of the disc examples in DIY being  round blade, pad, etc.

DISTANCE_BETWEEN_TWO_STAIRS

Distance Between Two Stairs

The distance between two stairs.

DOOR_OR_PASSAGE_WIDTH

Door or Passage Width

Indicates the door passing width.

DOOR_THICKNESS_MAX

Door Thickness Maximum

Indicates the maximum thickness of the door.

DOOR_THICKNESS_MIN

Door Thickness Minimum

Indicates the minimum thickness of the door.

DRAWER_DIMENSION

Drawer Dimension

The textual representation of the size dimension specified by the size type.Example 15 Inches wide X 20 inches deep X 6 inches high.

DRAWER_LENGTH_MAX

Drawer Length Maximum

Indicates the maximum length of the drawer.

DRAWER_LENGTH_MIN

Drawer Length Minimum

Indicates the minimum length of the drawer.

DRESS_LENGTH

Dress Length

Measurement of dress length from the collar to the bottom hem

DRILL_LENGTH

Drill Length

The length of the drill included straight shank, cutting wedge and head.

DUCT_WIDTH_RANGE_HOOD

Duct Width Range Hood

The width of the duct for a range hood.  A range hood is a device that hangs above the stove or cooktop for ventilation.

EGG_SIZE

Egg Size

Indicates the egg size as recommended by the local regulation. Examples 1, 2, 3, 4, 5, 6, 7 with weight in grams  or  Small, Medium, Large, Extra Large, Jumbo

ENVELOPE

Envelope

Envelopes come in various size types. These vary through out the world. #9, A-1, DL, C1, C2, C6.

EXTENDED_DEPTH

Extended Depth

Measurement of the expanded depth of an item for items where the item can be expanded such as a duffle bag with closures which open to allow size folds to open and allow more contents inside.

EYEWEAR_BRIDGE_WIDTH

Eyewear Bridge Width

Measurement of the width of the bridge.  Measured as worn from the edge of one lens/frame to the edge of the opposite lens/frame opposite wear the eyewear would rest on the nose of the wearer.

EYEWEAR_FRAME_WIDTH

Eyewear Frame Width

Measurement of the width of the frame.  Measured as worn from the wearer's temple to the wearer's opposite temple.

EYEWEAR_LENS_HEIGHT

Eyewear Lens Height

Measurement of the height of the lens not including the frames.  Measured as worn from the wearer's check to the wearer's forehead.

EYEWEAR_LENS_WIDTH

Eyewear Lens Width

Measurement of the width of the lens not including the frames.  Measured as worn from the wearer's nose to the wearer's temple.

EYEWEAR_TEMPLE_LENGTH

Eyewear Temple Length

Measurement of the length of the arm.  Measured as worn from the wearer's temple to the end of the ear wrap/stem.

FAN_DIAMETER

Fan Diameter

The diameter of the blades of a fan.

FIREARM_CHAMBER_LENGTH

Firearm Chamber Length

The portion of the barrel or firing cylinder in which the cartridge is inserted prior to being fired.

FLOW_RATE_MAX

Flow Rate Maximum

Indicates the maximum flow rate, e.g. pumps, sprayers or showerheads.

FLUE_GAS_OUTLET_DIAMETER

Flue Gas Outlet Diameter

The diameter of the flue gas outlet. A flue is a pipe or channel for conveying exhaust gases from a fireplace, oven, boiler etc.

FOOTBALL

Football

The size of the ball used in Football, also know as a soccer ball, not to be confused with an American Football. 3, 5

FOOTIES_SHOULDER_TO_TOE

Footies Shoulder To Toe

Measurement from the top of the shoulder to the base of the heel as measured along the back of the garment.

FRONT_RISE

Front Rise

Measurement from the top of the waistband to the crotch at the front of the pants.

FRONT_VIEW_WIDTH_PRODUCT

Front View Width

The width of the front view of the product.

FRONT_WHEEL_DIAMETER

Front Wheel Diameter

Indicates the diameter of the front wheel.

FUEL_CAPACITY

Fuel Capacity

the capacity measurement of that the trade item was designed to be able to hold fuel.

FUEL_RESERVE_CAPACITY

Fuel Reserve Capacity

the capacity measurement of that the trade item was designed to be able to hold fuel in reserve as supplemental. In a car, a fuel tank may show empty but has a reserve capacity

GATEWAY_HEIGHT

Gateway Height

Indicates the gateway height of e.g. a garage or carport.

GATEWAY_WIDTH

Gateway Width

Indicates the gateway width of e.g. a garage or carport.

GRADIENT_MAX

Gradient Maximum

Indicates the maximum gradient, e.g. a lawn mowers can handle.

GRAIN_SIZE_MAX

Grain Size Max

Indicates the maximum grain size, e.g. sandpaper.

GRIND_WIDTH

Grind Width

The width of the grind for example for a  sheet sander.

GROUND_CLEARANCE

Ground Clearance

Measurement of height from the bottom of the wheel to the top of the board or chassis.

GROWTH_HEIGHT_MAX

Growth Height Maximum

Indicates the maximal growth height, e.g. plants.

GROWTH_HEIGHT_MIN

Growth Height Minimum

Indicates the minimal growth height, e.g. plants.

HANDLE_LENGTH

Handle Length

Measurement of a handle from it's attachment to an item to the tip

HEEL_HEIGHT

Heel Height

The measurement of the heel of footwear is measured at the outsole from the middle of the heel to the sole.

HEIGHT_BETWEEN_FLOOR_AND_BOTTOM_STAIR

Height Between Floor and  Bottom Stair

The distance between the floor and the bottom stair.

HEIGHT_MAX

Height Max

Indicates the maximum height.

HEIGHT_OF_PLANT_CONTAINER

Height of Plant Container

Indicates the height of a plant container, e.g. a plant bowl.

HEIGHT_OF_PLANT_MIN

Height of Plant Minimum

Indicates the minimum height of a plant without container.

HIDDEN_PLATFORM_HEIGHT

Hidden Platform Height

Measurement at the outsole from the foot bed to the sole where the platform is wrapped with material to hide the platform making it appear as part of the shoe.

HIPS

Hips

The measurement around the fullest part of the hips.

HITCH_SHANK

Hitch Shank

A device which attaches directly to the tow vehicle providing the connection between the tow vehicle and the trailer. A fixed tongue hitch includes the ball platform, while a receiver style hitch has a receptacle (typically 1-1/4" or 2") for inserting special ball mounts or bike racks.

HOLE_SIZE

Hole Size

Indicates hole size in inches for paper, paper punches, and other paper products.

HOSE_DIAMETER

Hose Diameter

Indicates the diameter of a hose for example a high pressure hose, shower hose or water pumps suction hose.

HOSE_LENGTH

Hose Length

The length of a hose e.g. high pressure hose, shower hose or water pumps suction hose.

HULL_LENGTH

Hull Length

Is the maximum length of a vessel's hull measured parallel to the waterline.

ILLUMINATED_AREA

Illuminated Area

The area that is illuminated by lighting for example by  Christmas lights or  lamps.

INLET_SPUD

Inlet Spud

A threaded opening on the water heater tank. Also a tool for digging having characteristics of a shade and chisel. Examples of sizes 2 X 1 1/4 fits a 1 1/4 " flush tube and a bowl with a 2 11/16" opening.

INSEAM

Inseam

Inseam

INSTALLATION_DEPTH_MAX

Installation Depth Max

Indicates the maximum installation depth for a product. Installation depth is the depth of a cut out for example the a cut out of a counter made for a range.

INSTALLATION_DIAMETER

Installation Diameter

Indicates the installation diameter.

INTAKE_HEIGHT

Intake Height

The intake height will be need for gardening machines.

IRONING_SURFACE_WIDTH

Ironing Surface Width

The width of the ironing surface area, e.g. of a steam iron or ironing board.

JAW_CAPACITY_MAX

Jaw Capacity Max

Indicates the maximum jaw capacity, e.g. groove pliers or plain vice.

JAW_OPENING_MAX

Jaw Opening Maximum

The jaw is any opposable articulated structure, typically used for grasping and manipulating something. The term jaws is also broadly applied to the whole of the structures constituting the vault of the trade item and serving to open and close it.

JEWELLRY_HEIGHT

Jewellry Height

Measurement of a piece of jewellery as measured from top to bottom across the face of the piece as it is worn.

JEWELLRY_WIDTH

Jewellry Width

Measurement of a piece of jewellery as measured from left to right across the face of the piece as it is worn.

KERB_WEIGHT

Kerb Weight

Is the total weight of a vehicle with standard equipment, all necessary operating consumables such as motor oil, transmission oil, coolant, air conditioning refrigerant, and a full tank of fuel, while not loaded with either passengers or cargo. This definition may differ from definitions used by governmental regulatory agencies or other organizations. Curb Weight in US

LADDER_HEIGHT

Ladder Height

Indicates the ladder height see: http://bulkydelivery.xeesa.com/gif/safety-ladder-6-step.jpg

LAWN_SIZE_MAX

Lawn Size Max

Indicates the maximal area of a lawn that can be covered by a lawn mower.

LEG_OPENING

Leg opening

Measurement of diameter of the leg opening at the bottom of the pant leg.

LENGTH

Length

Length

LENGTH_MAX

Length Maximum

Indicates the maximum length on an expandable product for example an expandable pole.

LENGTH_MIN

Length Minimum

Indicates the minimum length or an expandable product for example and expandable pole,

LENGTH_RETRACTED_ROLLED_UP_STATE

Length Retracted or Rolled Up State

The length of the product when fully retracted.

LENGTH_SPREAD_UNROLLED_STATE

Length Spread or Unrolled State

The length of the product when fully extended e.g. length of a rolled out wallpaper.

LENGTH_UP_TO

Length Up To

Indicates a variety of lengths up to the maximum length.

LENS_DIAMETER

Lens Diameter

The diameter of the lens in a camera, telescope or any optical type lens that measures in diameter

LIGHT_BEAM_ANGLE

Light Beam Angle

Light Beam Angle is the degree of width that light emits from its source. Specifically, this is the angle between opposing points of the beam axis where the intensity drops to 50% of max intensity.

LIGHT_BEAM_SPREAD

Light Beam Spread

Light Beam Spread indicates amount of divergence of the light beam and is defined as the length within which the minimum illumination on a surface normal to the axis of the beam is 1/10th of the maximum.

LIQUID_CAPACITY

Liquid Capacity

The capacity measurement of water, beverages, milk, etc. that the trade item was designed to hold. Example: watercraft, fish tanks, etc.

MAST_DIAMETER

Mast Diameter

Indicates the diameter of the mast for example the mast of a sunshade.

MITER_CUT_MAX

Miter Cut Max

Indicates the maximum miter cut, e.g. compound meter saw or sliding meter saw.

NAIL_LENGTH_INCLUDING_HEAD

Nail Length Including Head

The length of the nail including the head.

NETTINGS_HORIZONTAL_WIRE_DIAMETER

Nettings Horizontal Wire Diameter

The thickness of the netting’s horizontal wires.

NETTINGS_VERTICAL_WIRE_DIAMETER

Nettings Vertical Wire Diameter

The thickness of the netting’s vertical wires.

ONE_DIMENSION

One  Dimension

One Dimension

ONSIES_SHOULDER_TO_TOE

Onsies Shoulder To Toe

Measurement from the top of the shoulder to the crotch as measured along the back of the garment.

OPERATING_DISTANCE_MAX

Operating Distance Max

Indicates the maximum operating distance. In case of an electric bikes it is the riding range up to.

OPERATING_HEIGHT

Operating Height

The operating height at which the user is permitted to work, e.g. steel work platform.

OPERATING_HEIGHT_MAX

Operating Height Maximum

The maximum operating height at which the user is permitted to work, e.g. steel work platform.

OUTSIDE_LEG

Outside Leg

The measurement of the outside leg seam. This is the distance from the waist to the bottom of the trousers.

OVERALL_DEPTH

Overall Depth

Indicates the depth overall.

PADLOCK_SHACKLE_HEIGHT

Padlock Shackle Height

Indicates the height of the shackle of a padlock. A shackle is a u-shaped piece of metal secured with a clevis pin or bolt across the opening.

PANT_RISE

Pant Rise

The distance between the middle of the crotch seam to the top of the waistband. Determines where pant will sit on the body to create a perceived waistline.

PAPER

Paper

Paper comes in various size types. These vary throughout the world. 8 1/2 X 11, A4, etc.

PARASOL_OPENED_DIAMETER

Parasol Opened Diameter

The diameter of the parasol when opened.

PASSAGE_HEIGHT_FRONT

Passage Height Front

The height of a passage or entrance for example the doorway of a garden house or the clearance of a bridge.

PASSAGE_HEIGHT_REAR

Passage Height Rear

The passage height of the rear of a structure such as a garden house.

PEDESTAL_HEIGHT

Pedestal Height

Indicates the pedestal height for example of a Swing-N-Slide.

PILE_HEIGHT

Pile Height

Indicates the height of the pile for example rug pile. Pile height is the thickness of a rug measured from the surface of a rug to its backing.

PLANE_DEPTH

Plane Depth

Indicates the maximum depth of the plane, e.g. block plane, bench plane or trimming plane.

PLANE_WIDTH

Plane Width

The width of the plane for example block plane, bench plane or trimming plane.

PLANTER_DIAMETER

Planter Diameter

Indicates the diameter of a planter or pot for a plant.

PLANT_DIAMETER_MIN

Plant Diameter Minimum

Indicates the minimum diameter of a plant without container as sold to consumer.

PLANT_NEW_SHOOT_LENGTH

Plant New Shoot Length

Indicates the new shoot length of a plant. In botany, shoots consist of stems including their appendages, the leaves and lateral buds, flowering stems and flower buds.[1][2] The new growth from seed germination that grows upward is a shoot where leaves will develop. In the spring, perennial plant shoots are the new growth that grows from the ground in herbaceous plants or the new stem and/or flower growth that grows on woody plants.

PLATFORM_HEIGHT

Platform Height

Measurement at the outsole from the foot bed to the sole

POND_SIZE_MAX

Pond Size Maximum

Indicates the maximum size of a pond.

POWER_CORD_LENGTH_WITHOUT_PLUG

Power Cord Length Without Plug

The length of the power cord without plug.

PRECIOUS_METAL_PURITY

Precious Metal Purity

Measurement or descriptive terms to describe the purity of the precious metal.  For example, 24 karats, or 950Plat.

PRECIOUS_METAL_WEIGHT

Precious Metal Weight

Measurement of the weight of the precious metal.

PUMP_DELIVERY_HEAD

Pump Delivery Head

Indicates the delivery head of pumps. Head is the height at which a pump can raise water up.

PUMP_DELIVERY_HEAD_MAX

Pump Delivery Head Max

Indicates the maximum delivery head of pumps.

RACQUET_LENGTH

Racquet Length

Measurement of the length of a racquet from the tip of the handle to the top of the head

REACH_HEIGHT

Reach Height

Indicates the reach height of an item for example the reach height of a ladder.

REAR_WHEEL_DIAMETER

Rear Wheel Diameter

Indicates the diameter of rear wheel.

REMOVAL_MAX

Removal Max

Indicates the maximal removable by use a special devise, e.g. topsoil.

RIDGE_HEIGHT_GARAGE_CARPORTS

Ridge Height Garage Carports

Indicates the ridge height of a garage or carport.

ROLL_LENGTH

Roll Length

The length of rolled out products, e.g. the rolled out wallpaper.

ROLL_WIDTH

Roll Width

Indicates the width of a roller for example paint roller.

ROOM_HEIGHT_MAX

Room Height Max

Indicates the maximum height of a retracted ladder or stair.

ROPE_LENGTH

Rope Length

The potential length of a rope included in a product for example the potential drying area of a clothesline dryer.

RUNNING_LENGTH

Running Length

Measurement of longest measure for the item which comes in contact with a surface (snow, ground, etc.) during normal use.

SANDING_AREA_LENGTH

Sanding Area Length

The length of the sanding area for example of an angle grinder.

SANDING_AREA_WIDTH

Sanding Area Length

The width of the sanding area for example for a sheet sander.

SAW_BAND_LENGTH

Saw Band Length

The length of the saw band for example for a band saw.

SAW_BAND_WIDTH

Saw Band Width

The width of the saw band for example for a reciprocating saw.

SAW_WHEEL_DIAMETER

Saw Wheel Diameter

The diameter of the saw blade of e.g. an angle grinder.

SCAFFOLD_HEIGHT

Scaffold Height

Indicates the height of scaffolding, Scaffolding is a structure  used by workers while building, repairing, or cleaning the buildings.

SCREW_DIAMETER_MAX

Screw Diameter Max

Indicates the maximum diameter of a screw. Generally this refers to the outside diameter of the threads.

SEAM_DEPTH_MAX

Seam Depth Max

The maximum depth of a joint or seam.

SEAT_BACK_HEIGHT

Seat Back Height

The seat back height from the base of the seat to the top of the back.

SEAT_HEIGHT

Seat Height

The height from the floor to the top of the seat.

SELF_PRIMING_HEIGHT_MAX

Self-priming Height Maximum

Indicates the maximum self priming height, e.g. of a pump.

SHACKLE_CLEARANCE

Shackle Clearance

Usable clearance the area between the shackles that allows to pass them through a hasp or hole, around a bar or, indeed, onto a cable. A shackle is a metal link, typically U-shaped, closed by a bolt, used to secure a chain or rope to something.

SHACKLE_DIAMETER

Shackle Diameter

Shackle sizes are measured by the diameter of the bow, not the pin.

SHACKLE_LENGTH

Shackle Length

Is measured from the top of the lock body to the inside of the shackle.

SHANK_SIZE

Shank Size

The shank is the end of a drill bit grasped by the chuck of a drill.

SHEETS_PER_ITEM

Sheets Per Item

The number of sheets when attached within an item examples Pads of paper, Sticky Notes, etc.

SHEET_DEPTH

Sheet Depth

Measurement of height of a sheet from the elastic band to the top of the mattress.

SHELF_DEPTH

Shelf Depth

The depth from the front to the back of the shelf.

SHOWER_HEAD_DIAMETER

Shower Head Diameter

The diameter of the shower head.

SIDE_BURNER_AREA

Side Burner Area

The area that can be used for cooking stove top, grill, on the side burner, off the main cook top, etc.

SIDE_VIEW_DEPTH

Side View Depth

Indicates the side view depth. See: http://www.hifi-regler.de/images_c/media/gallery/z_tiefe_sharp-lc-40-le-705-e_100003140.p800x600.jpg.

SINGLE_STAIR_WIDTH

Single Stair Width

Indicates the width of a single stair.

SLEEVE

Sleeve

NOT AVAILABLE

SPLITTING_LENGTH

Splitting Length

The splitting length, e.g. wood splitter

SPOUT_HEIGHT

Spout Height

Spout height is measured from the sink/countertop surface vertically up to the highest point..

SPOUT_REACH

Spout Reach

Spout reach is measured from the centre of the spout base horizontally out to the water stream.

STAIRCASE_WIDTH

Staircase Width

The width of stairs for example loft stairs or spiral staircase.

STANDING_HEIGHT

Standing Height

The maximum height at which the user can stand, e.g. on a steel work platform.

STICK_DIAMETER_MAX

Stick Diameter Maximum

Indicates the maximum diameter of a stick, e.g. broom stick or telescopic stick.

STICK_DIAMETER_MIN

Stick Diameter Minimum

Indicates the minimum diameter of a stick, e.g. broom stick or telescopic stick.

STICK_LENGTH_MAX

Stick Length Maximum

Indicates the maximum length of a stick, e.g. broom stick or telescopic stick.

STICK_LENGTH_MIN

Stick Length Minimum

Indicates the minimum length of a stick, e.g. broom stick or telescopic stick.

STORAGE_LENGTH

Storage Length

The length of the product in its storage state.

STOREY_HEIGHT

Storey Height

Indicates the height of storey. A storey (or story in American English) is any level part of a building that could be used by people (for living, work, storage, recreation, etc.). The terms "floor", "level", or "deck" can also be used in this sense.

STOVE_PIPE_DIAMETER

Stove Pipe Diameter

Indicates the diameter of a stove pipe of e.g. a pellet stove, wood stove or a wood furnace.

STROKE_LENGTH

Stroke Length

Is back-and-forth motion. Each cycle of reciprocation consists of two opposite motions: there is a motion in one direction, and then a motion back in the opposite direction. Each of these is called a stroke. The term is also used to mean the length of the stroke.

SUPPLY_LINE_LENGTH_TO_ILLUMINANT

Supply Line Length to Illuminant

The supply line length until the first illuminant for example for length of cord until the first light on Christmas lights.

TABLE_SIZE_MAX

Table Size Maximum

Indicates the maximum size of the table top for example the table top of a table saw.

TAKE_OFF_MAX

Take-off Maximum

Indicates the maximum take-off, e.g. jointer or planer.  Take-off is defined as the amount of material removed in a single pass.

TANK_SIZE

Tank Size

The measurement  large receptacle or storage chamber, especially for liquid or gas. This is usually a volume.

THICKNESS

Thickness

The measurement from top to bottom or front to back of such items like mattress pillows, cushions, etc.

THREAD_CUTTING_WIDTH

Thread Cutting Width

Indicates the width of a cutting thread/line for example the cutting line of string trimmer.

TIRE_WIDTH

Tire Width

Indicates the tire width.

TORSO_LENGTH

Torso Length

Measurement of torsos length from the neck line to the bottom hem

TOTAL_HEIGHT_WORKBENCH

Total Height Workbench

Indicates the total height of the work surface of a workbench.

TOTAL_STONE_KARAT

Total Stone karat

The number of karats of the stones in the item as related to the descriptiveSizeDimension.

TOTAL_STRENGTH_PRODUCT

Total Strength Product

Indicates the total strength of a product.

TOTAL_WIDTH_WORKBENCH

Total Width Workbench

Indicates the total width of the work surface of a workbench.

TOWING_CAPACITY

Towing Capacity

the capacity measurement of that the trade item was designed to be able to pull or tow.

TREAD_DEPTH

Tread Depth

The measurement between the top of the tread rubber to the bottom of the tire's deepest grooves. Because it is difficult to accurately measure tread depth with a ruler, tread depth is best measured with a tire tread depth gauge.

TREAD_WIDTH

Tread Width

The measurement between the outboard and inboard edges of a new tire's tread design. Ideally it approximates the width of the tread that comes into contact with the road.

TREE_STAND_HEIGHT_MAX

Tree Height  Stand Max

Indicates the maximum tree height that is suitable for a stand such as a Christmas tree stand.

TURNTABLE_DIAMETER

Turntable Diameter

The diameter of the product’s turntable.

TYRE_RIM_SIZE

Tyre Rim Size

The rim of a tyre carries different measures both width and depth to make a rim size. The calculation fits into a rim size that would be stated here, Examples 30c, 2.2, 3.0, 2.5

TYRE_SIZE

Tyre Size

The size of the tyre there are various ways US, EU, ISO, Auto, Bicycle etc. For Example A bicycle tyre sequence: "28-622, 700 x 28C, 28 x 1 5/8 x 1 1/8" you at least have a useful deciphering reference. The rim diameter is 622mm and tyre outer diameter is around 700mm (the actual outer diameter will depend on the tyre's height). The tyre width is 28mm.

USABLE_DEPTH

Usable Depth

Measurement of the distance from the front to the back inner rims of the product when it is  placed on its principal base on a flat surface.

USABLE_DIAMETER

Usable Diameter

Diameter of the highest circular usable surface of the product when it is placed on a flat surface. The usable part of the product is the part meant for the intended purpose of the product for example an inner section of a bowl or inner diameter of a flower pot.

USABLE_HEIGHT

Usable Height

Measurement of the distance from the highest point of the product, when it is placed on its principal base on a flat surface  to its internal bottom.

USABLE_LENGTH

Usable Length

Total length of the product minus the length of additional elements for its usage for example length of a knife blade, length of a nail file rocky surface.

USABLE_WIDTH

Usable Width

Measurement of the distance from the left to the right inner rims when the product is placed on its principal base on a flat surface.

VEHICLE_DRY_WEIGHT

Vehicle Dry Weight

Is the weight of a vehicle without any consumables, passengers, or cargo.

VOLUME_CAPACITY

Volume Capacity

The capacity measurement that the trade item was designed to hold. Example Toilets, Plumping, storage bins all have an amount of volume capacity. 4 Cubic Metres

WAIST

Waist

NOT AVAILABLE

WAIST_WIDTH

Waist Width

Measurement of width at the narrowest part of the item.

WATCH_CASE_DEPTH

Watch Case Depth

Measurement of the watch case as measured from the top of the bezel to the watch back.

WATCH_CASE_HEIGHT

Watch Case Height

Measurement of the watch case as measured from the top most point (above the 12) to the lowest most point (below the 6).

WATCH_CASE_WIDTH

Watch Case Width

Measurement of the watch case as measured from the left most point (left of the9) to the right most point (right of the 3).

WATCH_STRAP_LENGTH

Watch Strap Length

Measurement of the watch band/strap from tip to tip as laid flat.  If the band/strap is one piece, this is also known as the watch strap/band circumference.

WATCH_STRAP_WIDTH

Watch Strap Width

Measurement of the watch band/strap width from side to side as laid flat.

WHEELBASE

Wheelbase

Measurement of the distance between axles as measured from wheel to wheel.

WHEEL_DEPTH

Wheel Depth

Measurement of depth of the wheel across the tread from left to right.

WHEEL_DIAMETER

Wheel Diameter

Measurement of the wheel across its face.

WIDTH

Width

Width

WINDOW_DROP_DISTANCE

Window Drop Distance

A method for controlling movement of a window glass in a vehicle using an electric motor associated with a drive mechanism through a cable.

WORKBENCH_LENGTH

Tool Table Length

The length of a workbench.

WORKING_PLATFORM_LENGTH

Working Platform Length

The length of the working platform.

WORKTOP_DEPTH

Worktop Depth

The depth of the worktop, countertop, tool table or head of  the product or integrated in the product (without accessories or attachments, e.g. rake ).